If you recently purchased honeycomb window shades to install over each of the panes of glass in your home, you will soon be enjoying the barrier of protection they provide against excessive sunlight and extreme temperatures. There are a few steps you can take to ensure your window shades remain in the best possible condition for a good many years. Here are some tips you can use to aid in keeping your honeycomb shades looking like new long after they have been in place.
Take Time To Remove Dust Frequently
Honeycomb shades are comprised in a way where there are many pockets where dust can become trapped. These pockets add to the aesthetics of the shades, but can cause the need for tedious cleaning sessions to keep them free of debris. Light-colored shades will require more frequent cleanings so the material does not become dingy in appearance. Use a vacuum cleaner upholstery attachment to whisk away debris easily. Make sure not to rub the dust into the grooved portions further by holding the brush a bit away from the fabric during the cleaning process.
Use Tools To Remove Dirt Caught In The Gaps
If a vacuum cleaner does not effectively remove dirt from the celled portions of your honeycomb shades, you may need to use other tactics to remove it. Use a hair dryer on a low setting to blow out dust from these areas. Alternately, a pipe cleaner or toothbrush can be rubbed along the edges of the cells to wipe away dirt. A piece of tape can also be used to remove dirt from these spots without causing it to be rubbed into the material in the process.
Spot Clean Stains Right Away To Minimize Discoloration
If you spill something on a honeycomb windows shade, it will need to be spot cleaned immediately to help in the avoidance of a permanent stain. Dilute a mild detergent in a bowl of water and use a non-abrasive sponge or a piece of microfiber cloth to apply the liquid directly to the affected area. Use a blotting motion to remove the debris from the cloth instead of rubbing the detergent into the material. This can cause the affected area to become larger in size as it is rubbed across additional portions of the material. Use a piece of dry cloth to blot the detergent from the material. This process can be repeated a few times if necessary.
Contact a local shutter company, like AAA Blind & Shutter Factory or a similar location, for more tips and ideas.
